Buying guide

How to Choose a Steam Canner for Canning

Updated on · By the Vacuum Sealer Compare team

A steam canner for canning is a tall pot that holds jars above a small amount of boiling water, and you should choose it by jar capacity, rack fit and stovetop height. For high-acid foods, compare a water bath canner and a steam canner on jar count, headspace and venting before you commit to one type.

On this page (11 sections)
  1. How does a steam canner for canning differ from a water bath canner?
  2. What foods belong in a steam canner and what do not?
  3. How does steam canner construction affect heat and safety?
  4. What temperature indicators should a steam canner have?
  5. How many jars should your steam canner hold?
  6. Where does a steam canner for canning fit on your stove?
  7. How do racks and jar spacing affect results in a steam canner?
  8. What is the difference between a steam canner and a steam juicer canner?
  9. How should you set up and use a steam canner for canning?
  10. What care and safety checks matter after each batch?
  11. How should you choose between the three canners in this guide?

A steam canner for canning heats jars with steam above a shallow layer of water, and you should choose it by capacity, rack design and fit on your stove. It suits high-acid foods such as jams, pickles and many fruits when you follow a tested recipe.

It is not a pressure canner for low-acid foods.

If you are new to home canning, start with your food list and jar sizes. That list tells you how many jars you need to hold, what height you can clear under your range hood and which method you will use most.

Our score weighs specs, features and buyer feedback against what you are shopping for. We compared construction, temperature indicators and jar capacity across the three options below.

Read the sections in order so you can match the pot to your kitchen.

For a full starter list, see what do i need for canning. That guide covers basic canning supplies and helps you budget for jars, lids and tools before you pick a pot.

How does a steam canner for canning differ from a water bath canner?

A steam canner uses steam above shallow water, while a water bath canner submerges jars in deep water. Both methods can suit high-acid foods, but they differ in water use, heating time and jar coverage.

You should pick based on the recipe you plan to use. Some tested recipes name a water bath, some name steam processing and some allow either method with the same time.

If a recipe names one method, use that method.

Capacity works differently in each design. A water bath pot must cover jars with water, so depth matters.

A steam canner must hold jars above water with room for steam to circulate, so rack height and lid fit matter.

Fuel use can differ too. A shallow layer of water can come to a boil faster and use less energy on many stoves.

A deep water bath takes longer to heat but gives you visual proof that jars are covered.

For a direct comparison, read water bath steamer canner. That guide breaks down which type fits your stove, your jars and your food list.

Rule: choose steam when your tested recipes allow it and your jar count fits the rack, and choose water bath when coverage by water matters to you.

What foods belong in a steam canner and what do not?

High-acid foods are the usual fit for a steam canner for canning. Jams, jellies, pickles, chutneys and many fruits fall in this group when prepared with tested recipes.

Low-acid foods need a pressure canner. Meats, seafood, plain vegetables and soups without enough acid should not go in a steam canner.

Heat from steam alone does not reach the pressure needed for those foods.

You should check each recipe for acid level and method. A recipe that says pressure process means you need a pressure canner, even if the same food can be cooked in a steam pot for serving.

Canning is about storage safety, not cooking alone.

Jar size also limits what you can can. Very large jars heat more slowly at the center, so you should use only sizes named in your tested recipe.

Do not stretch a recipe to a larger jar to save time.

That larger pressure model suits readers who grow garden produce or buy meat in bulk. It has a cast aluminum body, a metal-to-metal seal and a pressure gauge with a regulator weight.

It works on gas, electric or flat-top stoves and weighs 22 pounds before food and water.

Rule: use a steam canner only for high-acid foods with a tested steam or water bath recipe, and use pressure canning for low-acid foods.

How to tell if your food is high-acid

Use a tested recipe as your guide, not your own taste test. Acid level depends on the fruit or vegetable, added lemon juice or vinegar and the recipe balance.

Pickles and jams often qualify because acid is part of the recipe.

Fruits vary by ripeness and variety, so follow the recipe for added acid. If a recipe calls for bottled lemon juice, use that amount.

Do not cut acid to suit your taste.

When in doubt, switch the food to fresh use or freezing. That choice keeps you safe while you learn which foods fit steam processing.

How does steam canner construction affect heat and safety?

Construction controls how fast water boils, how steam flows and how well jars stay upright. A solid rack, a tight lid and a stable base matter more than a fancy finish.

Steel and enamelware pots can heat quickly and suit many stoves. Aluminum pots also heat quickly and resist rust.

Each material needs care to avoid dents, scratches or stuck-on food that can affect sealing surfaces.

A rack should hold jars off the bottom and keep them from tipping. It should also leave gaps so steam can pass between jars.

Crowded jars can create cold spots if steam cannot reach every side.

Lid fit matters for steam flow. A loose lid can let steam escape too early and slow heating.

A tight lid with a proper vent lets steam fill the pot and then escape in a steady stream.

This Granite Ware set has an enameled steel pot, a speckled black finish and a lid. It is not suitable for glass cooktops or induction stovetops.

The rack is rust-proof chromed steel and gives jars proper spacing during processing.

The set also includes a five-piece toolset. That set has a bubble remover and ruler, a jar lifter, a magnetic lid lifter, a jar wrench and a jar funnel for standard and wide-mouth jars.

Rule: choose construction with a stable rack, a lid that fits well and a base that sits flat on your burner.

What temperature indicators should a steam canner have?

A steam canner has no dial that guarantees safety, so you read steam flow and boiling as your signals. A strong, steady stream of steam from the vent tells you the pot is full of steam.

You should wait for that full flow before you start timing. A weak wisp of steam means the pot is still heating.

Starting the timer too early can under-process jars.

A thermometer can help you learn your stove and pot. It can show how fast the water boils and whether the vent area stays hot.

It does not replace a tested processing time.

Some steam canners add a gauge or a whistle. A gauge can give you a quick visual cue, but you should still check vent flow.

Steam canner temperature vs water bath temperature

A water bath canner shows temperature through boiling water around the jars. A steam canner shows temperature through steam above the water.

Both need a full boil, but the cues look different.

In a water bath, jars should stay covered by water for the full time. In a steam canner, jars sit above water and steam must reach the top of the pot.

You should keep the burner steady once the pot reaches a full boil. A rolling boil that splashes jars can cause siphoning or loose lids.

A steady boil with strong steam is the goal.

Rule: start timing only when steam flows steadily from the vent, and keep that flow steady for the full processing time.

How many jars should your steam canner hold?

Jar capacity is the first choice for most buyers. Count the jars you will process in one batch, not the jars you own in total.

A full batch saves fuel and time, while a half-empty pot wastes both.

Quart jars suit families that use food fast. Pint jars suit jams, pickles and sauces for smaller households.

Half-pint jars suit gifts and small servings, but they need more filling work per batch.

A 21.5-quart pot with a rack that holds 7 one-quart jars can also hold more pints or half-pints. That flexibility helps if you switch jar sizes by season.

Check the rack layout before you assume a higher count.

This smaller All American model weighs 15 pounds and has a cast aluminum body with a metal-to-metal seal. It has a pressure gauge, an overpressure plug and a regulator weight.

It works on gas, electric or flat-top stoves and includes a phenolic handle.

Rule: buy capacity for your most common jar size, and do not buy a larger pot unless you will fill it most times.

Where does a steam canner for canning fit on your stove?

Height and burner size decide whether a canner works well in your kitchen. A tall pot can block heat distribution on a small burner and can hit a range hood or cabinet.

Measure the pot height with the lid on. Then measure the space from your burner to the bottom of your hood or cabinet.

You need room to lift the lid and remove hot jars without burning yourself.

Burner diameter matters too. A wide pot on a small burner can heat unevenly and waste fuel.

A pot that matches your burner size boils faster and holds a steadier temp.

Flat-top and glass cooktops need care. Some pots suit them and some do not.

Check the base of the pot and the maker guidance before you use it on a glass surface.

Induction needs a compatible base. If your pot is not made for induction, it will not heat properly.

Rule: measure burner size, hood clearance and cooktop type first, and reject any pot that does not fit with room to spare.

How do racks and jar spacing affect results in a steam canner?

Racks keep jars off the hot bottom and help steam reach each jar. Good spacing lets steam pass between jars and reduces cold spots.

Poor spacing can leave one side of a jar cooler than the other.

A rack with small feet can sit too low in shallow water. Jars then sit close to boiling water and can splash or siphon.

A taller rack gives steam room to circulate and keeps jars more stable.

Jar spacing should allow steam flow without letting jars touch during boiling. Touching jars can shift lids and cause uneven heating.

A snug rack that holds jars steady is better than a loose rack that lets them knock together.

You should also check rack material for rust and sharp edges. A rusted rack can scratch jars and stain food.

A coated or chromed rack that stays clean helps you handle jars more safely.

For rack options, see best water bath canner rack. That guide helps you match rack size to pot diameter and jar size.

Rule: choose a rack that holds jars upright, keeps them off the bottom and leaves clear gaps for steam.

What is the difference between a steam canner and a steam juicer canner?

A steam canner processes filled jars, while a steam juicer extracts juice from fruit before canning. The two tools look similar but do different jobs in your kitchen.

A juicer canner has a colander basket and a spigot for juice. You load fruit in the basket, steam it and collect juice below.

You then can that juice in jars with a steam canner or a water bath canner.

A steam canner for canning has a rack for jars and no juice spigot. You fill jars with food, add lids and process the jars for the recipe time.

You do not use it to extract juice.

Some buyers need both tools. A juicer helps with large fruit harvests, and a canner helps you store the juice or other foods.

Other buyers only need one tool based on their food list.

Compare the two roles in steam juicer canner. That guide explains when a juicer makes sense and when a canner alone is enough.

Rule: buy a juicer canner to extract juice, and buy a steam canner to process filled jars.

How should you set up and use a steam canner for canning?

Setup starts with clean jars, lids and tools. Wash jars, keep lids hot as your recipe directs and prep food with tested amounts of acid and salt.

Work in a clean area with towels and a jar lifter within reach.

Place the rack in the pot and add the amount of water your recipe or maker directs. Do not guess the water level.

Too little water can boil dry, and too much water can splash jars.

Load jars with headspace as your recipe directs. Remove air bubbles with a bubble remover, wipe rims clean and add lids and bands as directed.

Place jars on the rack with space between them.

Heat the pot until steam flows strongly from the vent. Start timing only then and keep the burner steady.

If steam flow drops, raise the heat a little and keep timing as your recipe directs.

For step-by-step help, read using steam canners for canning. That guide walks through loading, timing and cooling in order.

Also check best ball canning jars if you need jars that match your pot. Jar size and mouth width affect both fit and recipe times.

Rule: follow the water level, headspace and timing in your tested recipe, and start timing only at full steam.

What care and safety checks matter after each batch?

Cooling matters as much as heating. Leave jars undisturbed on a towel for 12 to 24 hours.

Do not retighten bands during cooling, and do not move jars while seals are forming.

After cooling, check each seal by pressing the lid center. A sealed lid should stay down when you press and lift.

Remove bands, label jars with contents and date, and store them in a cool, dark place.

Wash the pot and rack after each use. Dry them fully to prevent rust or stains.

Check the lid, vent and rack for damage before your next batch. A bent rack or damaged lid can affect steam flow.

Keep records of recipe, jar size and processing time. Those notes help you repeat a good batch and spot mistakes.

If a jar fails to seal, refrigerate it and use it soon or reprocess it with a tested recipe.

Rule: cool jars without disturbance, check seals after 12 to 24 hours and store only sealed jars at room temp.

How should you choose between the three canners in this guide?

Choose by food type first, then by capacity and stove fit. A steam canner suits high-acid foods, while the two pressure models suit low-acid foods and also work as pressure cookers.

The 21.5-quart All American 1930 Pressure Cooker/Canner suits large batches of low-acid foods. It holds up to 18 pint or 7 one-quart jars and has a metal-to-metal seal, a pressure gauge and a regulator weight.

It is a strong pick for garden bulk and meat processing.

The 15.5-quart All American 1930 Pressure Cooker/Canner suits smaller batches with the same metal-to-metal seal design. It holds up to 10 pint or 7 one-quart jars and includes 2 canning racks.

It is a strong pick if you can smaller loads more often.

The Granite Ware set suits water bath canning for high-acid foods. Its 21.5-quart enamelware pot holds 7 one-quart, 9 pint or 12 half-pint jars on the rack.

Its toolset covers filling, bubble removal, lid handling and jar lifting.

We compared these three on capacity, construction and temperature control cues. The pressure models give you gauge and regulator control for low-acid foods.

The water bath set gives you a rack and tools for high-acid foods on stoves it supports.

Final rule: pick a steam canner or water bath canner for high-acid foods, and pick a pressure canner for low-acid foods, then match capacity to your most used jar size.

Frequently asked questions

What is a steam canner for canning?

A steam canner for canning is a pot with a rack and lid that lets jars sit above a shallow layer of boiling water. Steam fills the pot and heats the jars for high-acid foods.

It uses less water than a full water bath, so you must follow tested times and keep the vent open.

Can a steam canner replace a water bath canner?

It can replace a water bath canner for some high-acid recipes when the maker and a tested recipe allow it. It does not replace pressure canning for low-acid foods.

Jar size, fill level and processing time still control safety.

How many jars fit in a steam canner?

Jar count depends on the pot diameter, rack spacing and jar size. Many full-size pots hold 7 one-quart jars, 9 pint jars or 12 half-pint jars.

You should count your most used jar size before you buy.

What temperature should a steam canner reach?

A steam canner should reach a full, steady boil so steam fills the pot completely. You judge readiness by a strong steam flow from the vent and consistent bubbling.

You do not rely on a dial setting alone for safety.