9 Best Water Bath Canning Racks (November 2026)
The best water bath canner rack include the IMPRESA Stainless Steel Canning Rack for large canners, the Vigamimn Canning Pot-Canning supplies starter kit (best full starter kit), and the Clroursim Canning Pot Water Bath Canner for pint and quart jars.
On this page (8 sections)
- The best water bath canner racks for different pots and jar loads
- How do these racks compare on size, load and lifting?
- What size rack fits your pot?
- How do jar size and load change your choice?
- Do you need handles, stacking or a full kit?
- What material and care should you expect?
- How should you set up a water bath load safely?
- What is the best pick for your setup?
The best water bath canner rack for most full loads is the IMPRESA Stainless Steel Canning Rack in 11 inches, because it comes as a stackable 2-pack for large canners and keeps jars off the pot bottom. If your pot is wider than 12 inches inside, the 12 inch picks below fit better.
If you do not own a canner yet, a full pot kit with a rack can be the simpler start.
Our score weighs specs, features and buyer feedback against what you are shopping for. We compared diameter, jar load, handles, stacking, material and what is included in each box.
We checked the specs for fit and capacity, and we looked at how each rack suits water bath canning, steam canning and pressure canning use.
If you are still deciding between methods, our guide on pressure canner vs water bath canner explains which foods each method suits. For a first shopping list, see what do i need for canning.
For silicone options, compare our best silicone canning rack guide. For small jars, see the best canning rack for small jars.
Our picks at a glance
-
1
-
2
Best full starter kitVigamimn Canning Pot-Canning supplies starter kit
9.6/10 our score
See it on Amazon -
3
Best for pint and quart jarsClroursim Canning Pot Water Bath Canner
9.4/10 our score
See it on Amazon
- 4
Check itKORCCI 12in Stainless Steel Canning Rack
Best for easy lifting - 5
Check itLEONICE Canning Supplies Starter Kit with Rack
Best tool kit for an existing pot - 6
Check itE-far 11.4” Stainless Steel Canning Rack
Best for 12.4 inch pots - 7
Check itGeneric 2PCS 12" Stainless Steel Canning Rack
Best with jar lifter included - 8
Check itVEVOR 21 QT Canning Pot with Rack
Best large pot for all cooktops - 9
Check itSupa Ant 10.8in Canning Rack for Pressure Canner
Best stackable set for smaller pots
The best water bath canner racks for different pots and jar loads
The picks below cover replacement inserts from 10.8 inches to 12 inches, plus full pots with racks included. Choose by your pot interior first, then by jar size and lifting style.
IMPRESA Stainless Steel Canning Rack: Best for large canners
- 11 inch stainless steel rack, pack of 2
- Stackable design for multiple layers
- Fits Presto 01781 23-Quart and All American 21.5-Quart
- Measures 11 x 11 x 0.25 inches
Two stackable 11 inch racks for large pressure and water bath canners. They lift jars for even heat and help with full batch loads.
Pros
- Pack of 2 for stacking
- 11 inch size fits large canners
- Stainless steel resists rust
Cons
- Measure interior diameter before you order
- No handles stated for lifting a full load
The IMPRESA suits owners of large canners who want a second rack for stacking. It is a pack of 2 at 11 inches, so you can run a single layer or stack for a larger batch when your recipe and jar height allow it.
Stainless steel resists rust through repeated boiling. The flat 0.25 inch profile keeps jars lifted off the bottom for even heat distribution.
That lift matters in water bath canning, where jars should not sit directly on the heat source. It also helps water move under the jars instead of pooling around a flat base.
IMPRESA says it fits the Presto 01781 23-Quart, the All American 21.5-Quart and more large canners. You should still measure your own pot, because usable interior diameter varies by model and by where the rack sits.
That check takes a minute and avoids a rack that binds on the way down.
There are no handles stated on this rack. Lifting a full wet load takes care, so use heat protection and lift straight up.
For many buyers, the trade-off is worth it for a 2-pack at this diameter, especially if you already own a jar lifter for single jars.
Vigamimn Canning Pot-Canning supplies starter kit: Best full starter kit
- 20 QT stainless steel canning pot, 12 in W x 11 in H
- Collapsible rack included
- Funnel, tongs, jar lifter, magnetic lid lifter, jar wrench and more
- 3-layered bottom for even heating
A 20 QT pot and collapsible rack with a full tool set for beginners. Good if you need a canner, rack and tools together.
Pros
- Pot and rack plus tools in one kit
- 20 QT size for full batches
- Tools cover lifting, filling and labeling
Cons
- Rack height is fixed, not adjustable
- Heavier full kit at 11.48 lb
The Vigamimn kit suits beginners who need a pot, a rack and tools in one purchase. It includes a 20 QT stainless steel pot at 12 inches wide by 11 inches high, plus a collapsible rack.
That single box covers the pot and the insert, so you do not need a separate rack search.
The tool set covers the main steps: funnel, tongs, jar lifter, magnetic lid lifter, jar wrench, stirrer, jam ladle, labels and heat-resistant gloves. That group saves a second shopping trip and helps you learn each step in order.
Each tool has a clear job, from filling jars to checking rings and marking dates.
The pot has a 3-layered bottom for even heating and a vented lid. Stainless steel suits water bath canning and steam canning for high-acid foods such as jams, jellies, pickles and salsas.
The 20 QT size supports full batches without needing a second pot for most home harvests.
The rack is collapsible for storage, but its height is fixed. It is set for standard wide-mouth and regular-mouth jars.
Against a rack-only pick, this kit costs more in space and weight at 11.48 lb, but it removes guesswork for a first setup and keeps all parts sized to work together.
Clroursim Canning Pot Water Bath Canner: Best for pint and quart jars
- 21.5 QT stainless steel pot, 12 in wide x 11.4 in tall
- Rack, lid, jar lifter, tongs, funnel, magnetic lid lifter and labels
- Food-grade stainless steel and silicone tools
- Fits pint or quart jar loads
A 21.5 QT pot with rack and tools for pint and quart jars. The tall shape suits full water bath loads.
Pros
- Tall 21.5 QT pot for quart jars
- Rack and core tools included
- Stainless steel pot and lid
Cons
- Kit tools add bulk if you already own them
- Check cooktop fit for a 12 inch wide pot
The Clroursim suits buyers who want a tall pot for pint and quart jars. The pot is 21.5 QT, 12 inches wide and 11.4 inches tall, with a rack and lid included.
The height gives quart jars room while the width keeps the pot workable on a home range.
The box also includes a jar lifter, canning tongs, funnel, magnetic lid lifter and canning labels. Tools are stainless steel and silicone.
That mix covers filling, lifting and labeling without extra purchases. Silicone parts add grip, while stainless tools handle repeated hot water contact.
Height helps with quart jars and water coverage. A taller pot gives more room for jars, water and headspace.
It also works for boiling, soup making and steaming, so the pot can earn its cabinet space outside canning season. That extra use matters if storage space is limited.
The trade-off is size. A 12 inch wide pot needs a burner and storage space that fit it.
If you already own tools, a rack-only insert takes less room. If you need the full set, this kit is a direct start with matched parts and no need to guess which tools fit the job.
KORCCI 12in Stainless Steel Canning Rack: Best for easy lifting
- 12 in stainless steel rack
- Holds 7 pint or 6 quart jars
- Contour handles rest on pot rim and fold for storage
- Silicone handles for grip
A 12 inch rack with handles that rest on the rim for loading and lifting. It holds a full pint or quart load.
Pros
- 12 inch size for wide pots
- Handles rest on rim
- Folds for storage
Cons
- Needs a pot with at least 12 inch usable interior
- Single rack only
The KORCCI suits anyone who lifts full racks often. It is a 12 inch stainless steel rack that holds 7 pint or 6 quart jars.
Contour handles rest on the pot rim for loading and lifting. That rim rest is useful when you load jars in place and then raise the full rack in one motion.
The handles fold for storage. Silicone on the handles helps with grip and heat protection.
That design reduces the awkward reach of lifting a wet rack by its edges. A 20 pound shelf weight capacity in the specs gives a sense of the load this flat rack is meant to carry.
Stainless steel resists rust and corrosion. The rack fits ordinary mouth and wide mouth mason jars.
For water bath canning, stable spacing helps water circulate around each jar. That circulation is part of why a rack beats setting jars on the pot bottom.
The limit is fit. You need a pot with a usable interior at least 12 inches across.
It is a single rack, so there is no stacking set in the box. Against the IMPRESA 2-pack, you trade stacking for handles and a wider diameter, which suits wide pots and heavy single layers.
LEONICE Canning Supplies Starter Kit with Rack: Best tool kit for an existing pot
- Canning rack plus ladle, tongs, funnel and jar lifter
- Magnetic lid lifter, bubble remover and jar wrench
- 24 jar labels included
- For pressure canner or water bath canner use
A tools-first kit with a rack for people who already own a large pot. It covers filling, lifting and labeling.
Pros
- Complete tool set without a new pot
- Rack included for existing pots
- Labels help track batches
Cons
- Rack diameter is not stated in title
- Check fit for your pot before you order
The LEONICE kit suits people who already own a large pot but lack tools. It includes a canning rack plus ladle, tongs, funnel, jar lifter, magnetic lid lifter, bubble remover, jar wrench and 24 labels.
The box is built around the steps you repeat in every batch.
The set is aimed at first batches of jam for a pressure canner or water bath canner. The tools cover mixing, filling, headspace, lifting and labeling.
That order matches the steps most recipes follow. The 24 labels help you mark contents and dates, which keeps stored jars easier to track.
Stainless steel tools suit repeated hot water use. The bubble remover and headspace tool help you set fill levels, which affects sealing and texture.
The jar wrench helps check ring tightness without overdoing it. Together, those small tools reduce common first batch errors.
The rack diameter is not stated, so measure your pot and check fit before you order. If you need a new pot, a full kit with a pot may fit better.
If your pot is ready, this tools-first kit avoids buying a second pot and keeps the cost focused on the parts you actually need.
E-far 11.4” Stainless Steel Canning Rack: Best for 12.4 inch pots
- 11.42 in stainless steel rack
- Holds 6 quart or 7 pint jars
- Fits most water bath canners of 12.4 in or larger
- Foldable handles and reinforced wire frame
An 11.42 inch rack sized for pots of 12.4 inches or larger. Foldable handles help lift a full load.
Pros
- Clear fit rule for 12.4 in pots
- Holds full quart or pint load
- Foldable handles save storage space
Cons
- Too large for smaller pots
- Single rack only
The E-far suits pots with a clear size rule. It is an 11.42 inch rack that fits most water bath canners of 12.4 inches or larger.
It holds 6 quart jars or 7 pint jars. That stated rule makes it easier to decide without guessing from a pot name alone.
The reinforced wire frame keeps jars upright and spaced. Wire construction lets water circulate and reduces direct heat contact with each jar.
That helps with even heating across the load. The frame is also meant to stop jars from shaking, bumping or tipping over during processing.
Foldable handles lay flat for storage. The curved handles give a non-slip grip when you lift the rack from hot water.
The rack is dishwasher safe, which speeds cleanup after a long batch day. The raised wire design also lets the same rack serve outside canning for steaming or cooling.
The trade-off is pot size. This rack will not fit smaller pots.
If your interior is under 12.4 inches, choose an 11 inch or 10.8 inch pick instead. If your pot is wide enough, the fit rule makes choosing simple and the full jar load is the main payoff.
Generic 2PCS 12" Stainless Steel Canning Rack: Best with jar lifter included
- 2PCS set with 12 in rack and jar lifter tongs
- Heat resistant silicone handles
- Holds 6 quart or 7 pint jars
- Fits pressure pots 20 QT and larger
A 12 inch rack with silicone handles plus jar lifter tongs. The raised feet keep jars off the pot bottom.
Pros
- Rack plus jar lifter in one set
- Silicone handles for lifting
- Raised feet for even heating
Cons
- Needs a wide pot interior
- Check handle clearance with your lid
The Generic 2PCS set suits buyers who want a rack plus a jar lifter together. It includes a 12 inch stainless steel rack and jar lifter tongs.
The rack holds 6 quart or 7 pint jars. The set covers both moving a full rack and moving single jars after processing.
Silicone handles are heat resistant and anti-slip. They rest on both sides of the pot for lifting.
The jar lifter has non-slip handles and a bottom clamping head for moving hot jars. The lifter length of 8.66 inches gives reach for deep pots.
Raised feet keep jars off the bottom of the pot. That lift helps prevent wobbling, collisions and uneven heating.
It also lets you batch process more jars with stable spacing. The rack itself is 2.1 inches high, with handle height listed at 6.7 inches in the details.
The set fits pressure pots of 20 QT and larger, based on the 12 inch diameter. You still need to check your own pot interior and lid clearance.
Against a rack-only pick, this set adds a useful lifter but takes more thought on handle height and storage.
VEVOR 21 QT Canning Pot with Rack: Best large pot for all cooktops
- 21 QT pot with rack and lid
- Dual handle and glass lid
- Compatible with induction, gas, electric, glass, ceramic and halogen
- Makes 7 jars at once
A 21 QT stainless steel pot with rack and glass lid for 7 jars. It works across common cooktops.
Pros
- 21 QT capacity for full batches
- Glass lid lets you watch the load
- Works on induction and other cooktops
Cons
- Rack size is tied to this pot
- Large footprint needs storage space
The VEVOR suits buyers who need a large pot with a rack and lid. It is a 21 QT stainless steel pot that makes 7 jars at once.
The glass lid lets you watch the load without lifting it often. That view helps you check boil and water level during a long batch.
The pot has dual handles for moving a full load. Stainless steel resists corrosion and high temperatures.
The matte finish is dishwasher safe for cleanup. The thickened bottom is aimed at steady heat across the base of the pot.
VEVOR says it works with induction, gas, electric, glass, ceramic and halogen cooktops. That range helps if your stove is glass top or induction.
For a glass top stove, also read our guide on a water bath canner for glass top stove. Matching the pot to your cooktop avoids a separate purchase later.
The trade-off is that the rack is part of this pot system. If you already own a pot, a replacement rack takes less space.
If you need the full setup, the pot, rack and lid in one box is the point of this pick, plus dual handles for lifting a full pot.
Supa Ant 10.8in Canning Rack for Pressure Canner: Best stackable set for smaller pots
- 10.8 in stainless steel racks, 3pcs
- 2 racks plus 1 base
- Stackable grooved design for jar separation
- Compatible with Presto, All American and more
A 10.8 inch set with 2 racks and a base for smaller pots. Grooves help space jars and stack layers.
Pros
- Smaller diameter for compact pots
- Stackable racks plus base
- Grooves help keep jars apart
Cons
- Smaller load than 12 inch racks
- Check jar count for your jar size
The Supa Ant suits smaller pots and stacked loads. It is a 10.8 inch set with 3pcs: 2 stainless steel racks and 1 base.
The smaller diameter fits pots that 12 inch racks cannot enter. That fit is the main reason to choose this set over wider racks.
Grooved racks help secure jars and prevent movement. The design keeps jars from tipping or touching during canning.
The base gives a stable foundation under the racks. The even hole pattern helps keep each jar steady and spaced correctly for circulation.
The set is stackable for efficient batch processing. That helps when you run multiple layers, as long as jar height and water coverage still meet your recipe.
Stainless steel resists bending, warping and corrosion. It is listed as dishwasher safe for cleanup after each run.
The trade-off is load size. A 10.8 inch rack holds fewer jars than a 12 inch rack.
It also suits pressure canner use more than water bath use in its design. For a compact water bath pot, the fit advantage is the main reason to choose it, especially when stacking helps you use the depth you have.
How do these racks compare on size, load and lifting?
The main split is diameter. The Supa Ant is 10.8 inches, the IMPRESA is 11 inches, the E-far is 11.42 inches, and the KORCCI and Generic racks are 12 inches.
Full kits center on 20 QT to 21.5 QT pots.
Jar load follows diameter. The 11.42 inch, 12 inch and 2PCS racks state 6 quart or 7 pint jars.
The VEVOR pot states 7 jars at once. Smaller racks hold fewer jars, so plan more batches for the same harvest.
| Product | Best for | Diameter | Material | Pack | Our score |
|---|---|---|---|---|---|
| IMPRESA Stainless Steel Canning Rack | large canners | 11 in | Stainless steel | 2 racks | 9.7 |
| Vigamimn Canning Pot-Canning supplies starter kit | full starter kit | 9.6 | |||
| Clroursim Canning Pot Water Bath Canner | pint and quart jars | 9.4 | |||
| KORCCI 12in Stainless Steel Canning Rack | easy lifting | 12 in | Stainless steel | 9.2 | |
| LEONICE Canning Supplies Starter Kit with Rack | tool kit for an existing pot | Stainless steel set | 9.0 | ||
| E-far 11.4” Stainless Steel Canning Rack | 12.4 inch pots | 11.42 in | 8.7 | ||
| Generic 2PCS 12" Stainless Steel Canning Rack | with jar lifter included | 12 in | 8.5 | ||
| VEVOR 21 QT Canning Pot with Rack | large pot for all cooktops | 8.3 | |||
| Supa Ant 10.8in Canning Rack for Pressure Canner | stackable set for smaller pots | 10.8 in | Stainless steel | 8.0 |
We compared the stated diameter, jar load, material, handles and included tools for each pick. We also noted whether a rack stacks, folds or needs a specific pot size.
The scores reflect fit for water bath canning first, then broader canner use.
Where the trade-offs show up in daily use
Diameter decides fit before any other detail. A 12 inch rack cannot shrink to suit an 11 inch pot, and a 10.8 inch rack cannot stretch to match a 12 inch load.
Handles decide how you lift, while stacking decides how many layers you can run. Full kits decide how much you buy at once.
Material is mostly stainless steel across this roundup, so the bigger split is shape and included parts. Flat racks keep jars low and steady.
Wire racks let water move more freely. Racks with raised feet keep jars off the bottom in the same way a flat insert does, but the height and spacing differ by model.
What size rack fits your pot?
Measure the usable inside diameter of your pot at the height where the rack will sit. Choose a rack that is smaller by about 0.5 to 1 inch.
That gap lets you lower the rack without scraping and lift it without binding.
10.8 inch to 11 inch racks
These sizes suit compact pots and many large pressure canners. The Supa Ant at 10.8 inches and the IMPRESA at 11 inches are the picks here.
They hold fewer jars than 12 inch racks.
11.4 inch to 12 inch racks
These sizes suit wide water bath pots. The E-far needs a pot of 12.4 inches or larger.
The KORCCI and Generic racks need a true 12 inch interior. Measure before you order.
Full pots with racks included
The Vigamimn, Clroursim and VEVOR kits include a pot, rack and lid. Their pot sizes are 20 QT to 21.5 QT.
Choose this path if you do not own a suitable pot.
Fit checks before first use
Do a dry fit before you add water or jars. Lower the empty rack into the pot and lift it out again.
Check that handles clear the rim and that the lid still closes with jars in place. Set the rack on a counter and load it with empty jars to see the true count for your jar size.
How do jar size and load change your choice?
Jar diameter matters as much as rack diameter. Wide mouth quart jars take more space than regular mouth pints.
A rack that holds 7 pints may hold fewer wide mouth jars in the same load.
Pint jars
Pint loads often fit 7 jars on a full rack. That is the stated load for several 12 inch picks.
Pints suit jams, jellies and pickles where you want smaller servings.
Quart jars
Quart loads often fit 6 jars on a full rack. The Clroursim pot is sized for pint or quart canning.
Tall pots help with water coverage for taller jars.
Half-pint and small jars
Small jars can pack more tightly, but spacing still matters for water flow. For small jar batches, our best canning rack for small jars guide covers spacing choices.
Do not crowd jars so they touch during processing.
Do you need handles, stacking or a full kit?
Handles for lifting a full load
Handles help you rest the rack on the rim and lift straight up. The KORCCI, E-far and Generic racks include handles.
That matters when the rack is wet and heavy with full jars.
Stacking for larger batches
Stacking lets you run more jars in one pot. The IMPRESA 2-pack and the Supa Ant set both support stacked use.
Check jar height and water coverage before you stack a second layer.
Rack only or full kit
Buy a rack only if your pot already fits the job. Our best canning rack for stock pot guide helps if you plan to use a stock pot.
Buy a kit if you need a pot, lid, rack and tools together. The best water bath canner roundup covers full canner systems in more depth.
What material and care should you expect?
Stainless steel
Most picks here are stainless steel. Stainless steel resists rust and corrosion through repeated boiling.
It also holds shape under heavy jar loads better than thin metal.
Silicone and plastic parts
Some handles use silicone for grip and heat protection. Silicone tools are common in kits for tongs and lifters.
Check each tool for heat limits before you use it in boiling water.
Cleaning and storage
Many stainless steel racks are dishwasher safe. Wash racks after each batch and dry them well.
Foldable handles and collapsible racks save cabinet space. Store racks flat so wires do not bend.
How should you set up a water bath load safely?
Set the rack in the pot first, then place empty jars on it. Fill jars, add liquid to the level your recipe states, and keep jars upright.
Add water to cover jars as your recipe directs.
Water level and jar spacing
Water should cover jars for water bath canning, based on your recipe. Jars should not touch each other or the pot sides.
The rack keeps jars off the bottom and spaced for circulation.
Lifting and cooling
Lift the rack by the handles or edges with heat protection. Move jars to a towel with space between them.
Let jars cool undisturbed, then check seals before you store them.
If you use a pressure canner for low-acid foods, also check our best replacement gasket for pressure canner guide. A worn gasket can affect pressure canner performance.
What is the best pick for your setup?
For most owners with a large pot, the IMPRESA 11 inch 2-pack is the top replacement rack. It stacks, fits common large canners and keeps jars lifted for even heat.
Your best water bath canner rack is the one that fits your interior diameter, holds your jar size and lets you lift a full load safely.
Pick the KORCCI or Generic 12 inch rack if your pot is wide and you want handles. Pick the E-far if your pot is 12.4 inches or larger and you want a clear fit rule.
Pick the Supa Ant if your pot is smaller and stacking matters more than maximum load.
Pick a full kit if you need a pot and tools now. The Vigamimn and Clroursim kits cover a first setup with a pot, rack and tools.
The VEVOR pick suits a large pot with a glass lid across common cooktops. Measure your pot first, then match the rack to the load you plan to can most often.
Our top 3 picks at a glance
-
1
-
2
Best full starter kitVigamimn Canning Pot-Canning supplies starter kit
9.6/10 our score
See it on Amazon -
3
Best for pint and quart jarsClroursim Canning Pot Water Bath Canner
9.4/10 our score
See it on Amazon
Frequently asked questions
What diameter water bath canner rack do I need?
Measure the usable inside diameter of your pot at the rack level. Choose a rack about 0.5 to 1 inch smaller so you can lower and lift it without scraping.
An 11 inch rack fits many large pots, while 12 inch racks suit wider pots.
Can I use a pressure canner rack in a water bath canner?
Often yes, if the diameter fits and jars stay upright and off the bottom. Water bath canning still needs jars covered by water as your recipe directs.
Check the rack height so jars do not touch the lid.
How many jars should a full rack hold?
Many full racks hold 7 pints or 6 quarts, but jar diameter changes the count. Wide mouth jars take more space than regular mouth jars.
Plan a test layout on the rack before you fill the pot.
Do I need handles on a canning rack?
Handles help when the rack is full and wet. They let you rest the rack on the rim and lift straight up.
Folding handles save cabinet space.
If you can lift full jars one by one safely, a handle-free rack can still work.
Should I buy a rack alone or a full kit?
Buy a rack alone if you already own a suitable pot and tools. Buy a full kit if you need a pot, rack, lid and tools at once.
Kits save separate shopping, but they may include tools you already own.
About this guide: Our look at water bath canner rack draws on maker specs, materials and what owners report. See how we research.



